SSimder MIG-250 6 In 1 Welder&Plasma Cutter Welder
Imposte incluse.
Spese di spedizione calcolate al check-out.
A 160A 6-in-1 welder and plasma cutter that welds and cuts for $299 โ gas MIG, flux core, Lift TIG, stick, and 40A plasma cutting in one box.
One MIG-250 replaces a MIG welder, a TIG welder, a stick welder, and a plasma cutter. SYN one-knob mode gets beginners laying beads in minutes; Manual mode gives experienced welders full control. It runs on standard 110V household power or 220V for full output. It welds steel, stainless, and cast iron โ it is not rated for aluminum.
Six Processes. One Machine.
Every process below runs on the same 160A power source. Switch the torch, pick the mode, keep working.
Gas MIG
160A ยท Solid Wire
Solid steel wire with CO2/argon shielding gas lays clean, low-spatter beads on mild steel โ the everyday workhorse mode.
Flux Core
Gas-Free ยท Outdoor Ready
Self-shielded flux core burns through light rust and paint on fences, trailers, and farm gear โ no gas bottle to buy or haul.
Lift TIG
DC ยท Precision Beads
Lift-arc TIG gives you a steady, controllable puddle for precise beads on steel and stainless.
Stick (MMA)
Hot Start ยท Field Repairs
A forceful arc digs into rusty, painted, or thick stock โ the fix-anything mode when you are out in the field.
Plasma Cut
40A ยท Narrow Kerf
Plasma arc slices through mild steel and stainless plate with a narrow kerf โ quick cuts, minimal cleanup.
At a Glance
Every number below comes from the official spec sheet โ the same figures we publish on Amazon.
| Processes | 6-in-1: Mixed Gas MIG, COโ MIG, Flux Core, Lift TIG, Stick, Plasma Cut |
|---|---|
| Max output | 160A (MIG / TIG / Stick) ยท 40A (Cut) |
| Voltage | Dual 110V / 220V |
| Aluminum | No โ built for steel, stainless & cast iron (see FAQ) |
| MIG wire | Solid & flux core ยท 0.8 / 1.0 mm ยท spool 0.5โ10 lb |
| Controls | SYN one-knob / Manual mode, 2T/4T, post-flow gas adjustment |
| Included torches | 15AK MIG gun, WP17 TIG torch, PT31 plasma torch, stick holder, ground clamp |
Built for
- โHome garage DIY โ welding and cutting in one box under $300, no separate tool purchases.
- โFarm & ranch repair โ stick for rusty thick steel, flux core for outdoor wind.
- โBeginners โ SYN one-knob mode auto-matches settings; 2T/4T steadies long beads.
- โFabrication on a budget โ cut brackets and sheet with the 40A plasma torch, then weld them.
Not built for
- โAluminum, any thickness โ not rated for aluminum welding, even with the optional spool gun. For aluminum choose the SD-4050 Pro (Pulse MIG) or TIG-250AC.
- โHF TIG precision start โ this is a Lift TIG machine; there is no high-frequency starter.
How It Compares
Same brand, three different budgets. Here is where the MIG-250 wins โ and where to step up.
| MIG-250 | SD-4050 Pro 10-in-1 flagship |
Typical 3-in-1 MIG | |
|---|---|---|---|
| Processes | 6-in-1 | 10-in-1 Pulse | 3-in-1 MIG |
| Plasma cutting | โ 40A | โ 50A Pilot Arc | โ |
| Aluminum | โ | โ Pulse MIG | โ |
| Max output | 160A | 200A | 140A |
| Dual voltage | โ 110V/220V | โ 110V/220V | varies |
| Best for | Weld + cut on a budget | Aluminum + full pro work | Light MIG only |
Full Specifications
| Model | MIG-250 |
|---|---|
| Input voltage | 110V / 220V dual |
| MIG current | Up to 160A |
| TIG current | Up to 160A (Lift) |
| Stick current | Up to 160A |
| Plasma cut | 40A |
| Weldable metals | Stainless, carbon steel, low-alloy steel, copper, titanium (Lift TIG), cast iron (stick) |
| Wire | Solid & flux core ยท 0.8 / 1.0 mm ยท 0.5โ10 lb spool |
| Machine weight | 7.7 kg / 17 lb (bare machine) |
| Boxed | 15.85 kg ยท 50 ร 34 ร 35 cm |
What's in the Box
Everything below ships in one carton โ no separate accessory orders needed to get started.
- 0115AK MIG welding gun
- 02WP17 TIG torch
- 03PT31 plasma cutting torch + accessories
- 04Stick electrode holder
- 05Ground clamp
- 06Gas hose
- 07CUT air divider
- 082 feed rollers (gas MIG / flux core)
- 09220V conversion cord (US / CA)
- 10User manual & quick-start card
Genuine SSimder Parts
Know Your Torches - and Their Kits
Every mode on this machine runs a specific torch, and every torch runs its own wear parts. Restock the exact kit yours needs.
15AK MIG Welding Consumables - 24Pcs
Shop the Kit →
WP17 TIG Welding Consumables - 55Pcs
Shop the Kit →
PT31 Plasma Cutter Consumables - 67Pcs/71Pcs
Shop the Kit →All kits are genuine SSimder parts matched to this machine's included torches. Not sure which one you need? A photo of your torch tip is all it takes โ service@ssimder.com.
Frequently Asked Questions
What's included in the box?
15AK MIG welding gun, WP17 TIG torch, PT31 plasma cutting torch, stick electrode holder, ground clamp, 2 feed rollers (gas MIG / flux core), gas hose, CUT air divider, 220V conversion cord (US/CA), and the user manual.
What metals can it weld?
Mixed Gas MIG welds stainless, carbon steel, low-alloy steel, and copper. COโ and flux core handle carbon steel and low-alloy steel (flux core also handles thin sheet). Lift TIG welds stainless, titanium, carbon steel, alloy steel, and copper. Stick welds thick plate, carbon steel, low-alloy steel, and cast iron.
Can it weld aluminum?
No โ the MIG-250 cannot weld aluminum, even with the optional spool gun . It is built for steel, stainless, and titanium. For aluminum, choose Pulse MIG models like the SSimder SD-4050 Pro or the SSimder TIG-250AC .
Does it run on 110V or 220V?
Both. Dual 110V/220V input means it works on household outlets and shop circuits. Plug into 220V for full 160A output; on 110V output is reduced, which is fine for most home-garage work.
Is it good for beginners?
Yes. SYN one-knob mode auto-matches the settings, and 2T/4T make steady beads easier to learn. Manual mode and Lift TIG leave room to grow into more advanced work.
What is SYN one-knob mode?
SYN mode auto-matches current, voltage, and wire feed to one dial. You set the power level and the machine handles the rest โ ideal for first-time welders. Switch to Manual mode for full hands-on control.
Does it support a spool gun?
Yes โ an optional spool gun is supported for smoother wire feeding on soft wires. But note: even with the spool gun attached, the MIG-250 is not rated for aluminum welding . If you need aluminum, the SD-4050 Pro welds it with Pulse MIG, no spool gun required.
How does it compare on value?
At $299, the MIG-250 delivers the same 6-in-1 welding-and-cutting coverage as premium combos like the YesWelder MCT-520 ($699), trading a higher amp ceiling and HF TIG for a budget-friendly price. You get MIG, TIG, stick, and plasma cutting in one machine without the premium cost.
