SSimder 15AK Non-Stick Coating MIG Welding Consumables 25PCS
Taxes incluses.
Frais d'expédition calculés à l'étape de paiement.
Non-stick coated 15AK contact tips that shed spatter instead of collecting it — steadier wire feed, less downtime cleaning, and longer usable tip life.
Anti-spatter coating keeps slag from welding itself onto the tip. Match the bore to your wire — 0.8 mm or 0.9 mm — thread them onto any 15AK / MB15 torch, and spend the saved cleanup time actually welding.
At a Glance
Every number below matches the product listing — no marketing inflation.
| Type | Anti-spatter (non-stick) coated copper contact tips |
|---|---|
| Thread | M6 × 25 mm |
| Sizes | 0.8 / 0.9 mm — match the wire diameter |
| Torch family | 15AK / MB15 standard |
| Kit | 20 pcs or 25 pcs — tips, nozzles, diffusers, wrench |
| Note | Coating wears with heavy use — inspect and replace as needed |
Built for
- ✓Gas MIG on 15AK/MB15 torches — Simder MIG-140 / MIG-250 and any 15AK-machine.
- ✓High-spatter work — flux core and dirty steel — coating sheds the slag.
- ✓Production nights — fewer stops to clean or swap tips.
- ✓Wire-matched feeding — pair the bore to the wire and feed stays steady.
Not built for
- ✕TIG or stick machines — these are MIG contact tips only.
- ✕Aluminum wire — aluminum needs its own tips and liner — this kit is for steel wire.
How It Compares
Same copper underneath — the coating is what changes your evening.
| Coated tips | Bare copper tips | Bulk mixed kits | |
|---|---|---|---|
| Spatter adhesion | Sheds it | collects slag | varies |
| Feed stability | Steadier | degrades as slag builds | varies |
| Tip life | Longer usable life | shorter | varies |
| Sizes | Matched 0.8 / 0.9 | both | mixed, unlabeled |
| Best for | Less cleaning, steadier arc | lowest price | topping up the drawer |
Full Specifications
| Type | Coated copper contact tips |
|---|---|
| Thread | M6 × 25 mm |
| Sizes | 0.8 / 0.9 mm |
| Torch family | 15AK / MB15 |
| Kit | 20 / 25 pcs |
What’s in the Box
Everything listed below ships in one carton — no separate accessory orders needed to get started.
- 01Non-stick coated contact tips — 0.8 / 0.9 mm, M6 × 25
- 02Gas nozzles
- 03Gas diffusers
- 04Tip wrench — counts by kit: 20 or 25 pcs
FAQS
What does the non-stick coating do?
The anti-spatter coating keeps slag from sticking to the tip, so the weld area stays cleaner and you spend less time stopping to clean or swap tips.
Do coated tips last longer?
The coating shields the copper base from heat and spatter, which extends usable tip life. It does wear with heavy use, so check the coating when you notice feed problems.
Which tip size should I use?
Match the tip bore to your wire diameter — 0.8 mm tips for 0.8 mm wire, 0.9 mm tips for 0.9 mm wire.
